Kontakt Contact

Wastewater pipes with an ovoid geometry have been in use since the 19th century. The benefits of this special pipe geometry are still appreciated nowadays, although the materials used have evolved from simple rubble masonry to state-of-the-art pipe materials made of thermoplastics.

Local authorities now have to cope with large fluctuations in discharge flow, especially in municipal combined water sewers. A dry-weather discharge that has been reduced by water-saving measures, for example, leads to a reduction in the flows of sanitary sewage, which exacerbates the risk of deposits accumulating in the sewers, especially during the summer months. The ovoid shape brings about an increase in flow velocity at the base of the duct, and hence improves hydraulic discharge with a flushing and self-cleaning effect. If precipitation flows and sanitary sewage flows are high, a correspondingly high drainage capacity is available because the profile becomes wider towards the top.

Long-term rehabilitation of ovoid pipes has thus certainly become one of the special challenges in sewer rehabilitation. Renewal of ovoid pipes in an open-cut trench, however, is not always possible. Nor do localised repair measures ensure permanent solutions for system operators.

In response to this problem SIMONA AG has created a solution. With SIMONA® PE 100 ovoid pipes – either with push-fit or welded – damaged old sewers can be rehabilitated with maximum reliability.

As a system manufacturer, SIMONA offers lining pipes, internal and external saddles and application-specific special fittings according to the requirements of the situation on site – tailored to the method of single pipe lining for ovoid cross sections.

Rehabilitation range

DN 200/300 - DN 805/1239 
according to hydraulic and structural requirements

Supporting Reference

Renovation of wastewater pipes and sewers with prefabricated pipes with and without annular space, DWA-M 143-13 

Back to overview

Insbesondere in städtischen Mischwasserkanälen haben die Kommunen heute mit stark wechselnden Abflussmengen zu kämpfen. Ein nicht zuletzt durch Wassersparmaßnahmen reduzierter Trockenwetterabfluss führt insbesondere im Sommer zu reduzierten Schmutzwassermengen, die Ablagerungen in den Kanälen begünstigen. Durch die Ei-Profilform wird im Sohlbereich bei niedriger Füllmenge eine erhöhte Fließgeschwindigkeit und somit ein besserer hydraulischer Abfluss mit Spül- und Selbstreinigungseffekt erreicht. Bei hohen Niederschlags- bzw. Schmutzwassermengen steht ein entsprechend hohes Abflussvolumen durch das sich nach oben erweiternde Profil zur Verfügung.

Die nachhaltige Rohrsanierung von Ei-Profilen gehört somit sicherlich zu den besonderen Herausforderungen in der Kanalsanierung. Eine Erneuerung der Ei-Profile im offenen Graben ist allerdings nicht immer möglich. Auch punktuelle Reparaturmaßnahmen garantieren den Betreibern keine dauerhaften Lösungen.

Für diese Problemstellung hat die SIMONA AG eine Lösung geschaffen. Mit SIMONA® PE 100 Ei-Profilrohren - ob gesteckt oder geschweißt - können schadhafte Altkanäle dauerhaft sicher saniert werden.

Als Systemproduzent bietet SIMONA für das Einzelrohrlining von Ei-Profilen passende Liningrohre, Innen- und Außensättel sowie anwendungsspezifische Sonderformteile entsprechend der situativen Baustellenanforderung an.